Description
Hall Research
HDMI + RS-232 Fiber Optic Extender
HDMI + RS-232 Fiber Optic Extender
The HR-731 is a kit of Sender and Receiver modules to extend HDMI and bi-directional RS-232 up to 1 Km (3280 ft) on a single (simplex) multi-mode fiber optic cable (uses SC connector).
The unit is fully HDCP compliant and supports HDMI 1.4 deep-color and 3D. EDID pass-through from the remote display to the source guarantees trouble free operation. Virtually all PC (DVI) and HDTV resolutions are supported.
The Sender / Receiver modules are housed in sturdy and compact metal enclosures and include surface mounting provisions.
- 1 HDMI input
- Transmits uncompressed HDMI video along with RS-232 to 1000m
- Supports Deep-color (HDMI 1.3 or 1.4) and 3D
- Compatible with DVI video (with DVI to HDMI input cable)
- Status indication of fiber-optic link, Source video, RS232 or CEC extension
- Bi-directional RS-232 data transmission between the sender and the receiver
- RS-232 control of the data channel selection and setup
- Safety interlock does not turn on high-power fiber LED drivers unless fiber-optic cable is plugged in at both ends
- Locking HDMI connectors
- Green design, turns off parts of circuit when they are not in use
Video Inputs: 1x HDMI or DVI
Supported Resolutions: HDTV from 480i to 1080p
Optical Wavelength: 780 nm to 980 nm
Optical Cable: Simplex (only 1 fiber) Multi-Mode. OM2 or OM3
Temperature: Operating: 32 to 122°F (0 to 50°C);
Storage: –40 to +185°F (–40 to +85°C)
Enclosure: Sender: Steel,
Receiver: Steel & Aluminum
MTBF: 90,000 hours (calculated estimate)
Power: 5 vDC, 2.6A
Size: Sender: 3.2H x 7.0W x 10.9D cm
Receiver: 3.2H x 7.0W x 10.9D cm
Weight: Sender: 0.18 kg
Receiver: 0.18 kg